Are you planning on getting a Satellite reception system from Dish Network or another satellite TV provider but are doubtful about how a satellite dish is working? Here is your answer.
A Satellite Dish is an antenna intended to receive the transmission and is a main piece of satellite TV providers, like as Dish Network. The typical satellite Dish of Dish Network and other providers consists of a parabolic (bowl-shaped) surface and a central feed horn. A regulator sends the received Radio or TV signal from the satellite via the horn, and the dish adjusts the signal into a relatively thin beam. The thin beam is generated as the dish reflects energy from the feed horn. The dish antenna at the receiving (where the purchaser or the TV is located ) end may merely receive information like TV programs , it cannot spread information. The receiving dish it is working in the exact opposite method of the Dish on the transmitter side. When a beam hits the curved dish, the parabola shape reflects the radio signal inward onto a specific point, just like a curved in mirror adjusts light onto a specific position. The curved dish adjusts the incoming radio waves onto the feed horn.
The feed horn then passes the signal onto the receiving equipment. Ideally, there will be no obstructions, such as trees to interfere with the signal from the satellite to the Dish Network satellite dish. With no obstructions you receive a much clearer picture or Radio .
A number of systems are planned to receive signals from more than one satellite. A recently designed dish design uses two or additional horns to pick up different satellite signals, from several directions . As the beams from several satellites hit the curved dish, they bounce at different angles so that one beam hits one of the horns and another beam hits a another horn.
The vital component in the feed horn is the LNB (low noise block down converter) The LNB amplifies the radio signal reflecting off the dish and filters out the noise (radio signals not carrying programming). The LNB transfers the amplified, filtered signal to the satellite TV receiver inside the viewer's house.
A cable named coax is running from the Dish Network satellite dish into the house and then links to the satellite TV receiver (black box) thus completing the connection.
The author is the owner of the
Satellite Communication Web Site.
For more information on the usage of satellite for communication visit his web site
http://www.the-satellite.com/
