A42MX16PQ100 Actel Field Programmable Gate Array Device

The devices are designed to meet performance, cost, and system interface requirements. Tuned clock buffer for high-speed clock-to-output operation and maximum clock frequency and MultiPlex I/O buffer design for high performance, reduced noise, and optimal I/O thresholds are some of the key features of A42MX16PQ100. They have Improved ActionProbe circuitry for high-speed probe operation.

As A42MX16PQ100 is manufactured using Actel’s non-volatile antifuse technology, the device retains its configuration indefinitely. Users need not store configuration data in an external component. The device is designed to save almost 60% in component cost and it also saves valuable board space as it is one of Actel’s single-chip solutions.

A42MX16PQ100 enables mixed-voltage operation with PCI-Compliant I/Os, up to 100% resource utilization and 100% pin locking, user-controllable timing. The A42MX16PQ100 offers segmented routing architecture with abundant routing tracks. During power-up, its tri-state outputs are in high-impedance mode for power-down and hot-insertion compliance and during power-down; all its inputs and outputs are in the high impedance state.

The A42MX16PQ100 is designed to offer better protection against design copying and pirating. It is designed for high-performance operation at 5.0V as well as at 3.3V. A42MX16PQ100 has a low-power mode to turn off input isolation devices, pump, input buffers, tri-state I/Os, as well as to turn off silicon signature sense amps.

Specification of A42MX16PQ100 is as follows; System Gates – 24000, Logic Modules; Sequential – 624, Combinatorial – 608, Clock-to-Out - 6.1 ns, Dedicated Flip-Flops – 624, Maximum Flip-Flops -928, Clocks – 2 and User I/O (maximum) – 140.

Buy Chips Fast offers the A42MX16PQ100, Actel parts, FPGAs and other hard-to-find and obsolete semiconductors and integrated circuits.