Free content for your website or blog
Home About Us Article Writing Most Read Articles Authors Blog Wiki Contact Us
RSS Register Login
Topics
 
Home > Home-and-Family >

Painting a room's woodwork and the trim around doors and windows opens up a number of designs potent

Date Published: 14th March 2006
Bookmark and Share Republish Painting a room's woodwork and the trim around doors and windows opens up a number of designs potent
Author: Roger King RSS Views: N/A PRINT ASK ABOUT THIS ARTICLE
When painting woodwork, start at the top of the room and work down: ceiling molding, doors, windows, chair-rail moldings, then baseboards, save wear and tear on your knees when painting baseboards by wearing knee pads or by kneeling on a cushion. The edge of woodwork is sometimes curved or very narrow, less than one inch, making it difficult to paint them neatly. Vertical edges of windows and door casings not only are narrow but also are often at an angle that is difficult to reach easily with a paintbrush.

It is sometimes a good idea to paint the woodwork before painting the walls, overlapping the walls slightly as you work on the woodwork. You find it easier to paint a straight edge along a wall than along the edges of narrow or curved woodwork. Be sure to protect freshly painted woodwork when working with a roller on walls. Before removing paint from woodwork, test the surface for old lead paint. The dust produced by sanding can carry the lead paint throughout the house, posing a serious health threat.


Painting woodwork requires a slightly different technique than covering the walls and ceilings does. The sweeping motions of using a roller give way to the control and precision of using a brush on a small surface. Also, brush marks are more likely to occur on wood than on plaster or drywall. You can choose a bold color to contrast with the color of walls and ceilings, or use the woodwork as a frame to highlight the color of the walls. If the woodwork is quite ordinary, you can make it blend into the background.

Whether the woodwork has been painted before or not, wood must be properly prepared before being painted. In general, this means filling any cracks and holes and then sanding the surface. To sand concave surface, wrap the paper around a section of hose or pipe. Large flat surfaces can be sanded with a sheet of paper wrapped around a wood block. The sanding gives the surface tooth, or something to which the new paint can adhere.


About The Author:
Roger King has been involved in home interior painting for several years, and has been helping people find and review the best value for interior painting solutions. Visit his Web site http://www.decorativeinteriorpainting.com to learn more about this service.


Tags: paintbrush, woodwork, wear and tear, serious health, doors windows, knee pads, new paint, health threat, flat surfaces, lead paint, straight edge, painting the walls, bold color
This article is free for republishing
Source: http://www.articlealley.com/article_36111_27.html
Bookmark and Share Republish Painting a room's woodwork and the trim around doors and windows opens up a number of designs potent

Ask a Question About this Article

Powered by