In our article for today is all about building a bell tower. So lets just set aside some of our worries and focus our mind in creating something wickedly awesome a Warhammer 40K Bell Tower. The most important component in building a bell tower is a brass bell which can be purchased on a dollar store which is abundant during Christmas season. Now that we had already the brass bell we can already ready to construct. So pull up your socks, demist your glasses and repeat after me,”Warhammer is my life”. Did I say that out loud? Anyway, let’s build some terrain.
Materials list:
• 20?x30? foam board
• utility knife
• pencil
• ruler
• popsicle sticks
• white glue
• an Ipod playing Zeppelin and a little patience while cutting the foam board.(you’ll see what I mean)
Step 1 Marking the Windows
I tried making a Gothic/Imperial guard/city of death look to it. This is the part where your artistic instinct license comes in. Feel free to design and let your mind and basic instinct come to play in choosing your desired design of the windows. Draw your chosen design of the window on the foam board. It would be better to create a lot of windows on your tower. It creates a more clear feeling while looking through the building.
Step 2 Cut out your Windows
Cut out your windows according to what you have drawn, it should be pretty strait forward. This will test your patience sometimes cause you have drawn more windows so expect to cut more windows too. Although this is where you'll need to bite the bullet for a good while and just cut till you are so occupied in your work that when somebody come sup to bother you and call up your name three times, that only the time you begin to respond cause you do not want to be disturbed when cutting out the windows. After cutting out all the drawn windows its better to sand the insides to have a smooth sides.
Step 3 Cut out base
After cutting out the windows you're going to cut a base out so that the walls have something to stick in to. You can made it just large enough to fit two space marines along the outside of the building once in place.
Step 4 Glue popsicle sticks
Start this by slicing popsicle sticks width channels in each level. Next glue popsicles sticks according to its place. These will give enough support to the structure when everything is glued together and in order. Once finished gluing all the popsicle sticks let it sit to dry for 5-10 minutes.
Step 5 Glue structure together
This is where we make busted up flooring. Make it so it’s able to rest on both walls for stronger support. Hold the walls up perpendicular to each other and glue down the floors until it dries up. This will enable the building to stand by itself. Be sure that the wall can stand up all by itself. Next glue supports to the base. Use the windows that were cut from the walls.
