http://www.articlealley.com en-us editorial@articlealley.com Air cylinders are recognized as the final module in a pneumatic, compressed air control or in any power system. Air cylinders, or pneumatic cylinders, are tools, which switch compressed air power into a usual mechanical or automatic energy. This mechanica... http://www.articlealley.com/article_251906_15.html 18th January 2008 An air cylinder is generally a device shaped cylindrical or tube, which contains a shaft, plunger, and a rod. There are other shapes and sizes as well, but the tube shaped air cylinder is the most commonly used. The rod inside the air cylinder hysterics i... http://www.articlealley.com/article_243439_15.html 09th November 2007 A knurling device is used in combination with a lathe to stamp the ends of metal tubes and other shafts. The stamped ruts might also act as hand grips for the user or superior grip for rubber and the plastic covers. The knurling tool itself comprises of v... http://www.articlealley.com/article_222396_15.html 04th October 2007 A metal lathe is general description for a hard machine device made to remove mateiral for a workpiece, by the way of a cutting tool. They were intentionally intended to machine metals; any how, with the start of plastics and other substances, and with th... http://www.articlealley.com/article_212321_15.html 12th September 2007 An engine lathe is a flat shaped piece of workholding, which is most frequently used to turn metal manually. By turning the metal and by using particular cutting devices, the engine lathe is competent of forming the metal into exact shapes. As its name go... http://www.articlealley.com/article_204720_15.html 22nd August 2007 A collet is the device used which forms part of the work holdings. Collet forms part of chucks and it is specifically designed and produced has a type of chuck. True length collet chucks, manual collet chucks, pull back collet chucks, collet reference are... http://www.articlealley.com/article_193636_14.html 26th July 2007 Workholding components are usually accuracy made production tooling used to securely and precisely place and hold work pieces in a production line course. Workholding components normally comprises of alignment pins, finders, clamps, jaws, bushings, modula... http://www.articlealley.com/article_166089_15.html 30th May 2007 Vacuum workholding is one of the highly effective techniques for holding thin and irregular shaped or non-magnetic parts. Even though parts that has large surface are ideal, as the holding force is as well large and there are techniques available for hold... http://www.articlealley.com/article_162755_15.html 21st May 2007 A metal lathe is common description for rigid machine device especially designed to remove material from work piece, during action of the cutting tool. They were primarily made to machine metals; any how, with the advent of plastics and other materials, a... http://www.articlealley.com/article_156583_15.html 08th May 2007 Chucks are accessories that are used to hold a workpiece or cut down tool on a machine tool. There are lots of different types of chucks products. Choices include: clamping chucks, core chucks, diaphragm chucks, collet chucks, draw bar chucks, electros... http://www.articlealley.com/article_152477_15.html 26th April 2007